Avaya P580 - Manual (Page 574)

16-32 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Table 6-105. LGMP Client Configuration Dialog Box Parameters
Enabling the LGMP Client
You can enable the LGMP client statistics using either the Web
Agent or the CLI.
Using the Web
Agent
To enable an LGMP client using the Web Agent:
1. Select LGMP Client from the L2 > Intelligent Multicast
group on the Web Agent window. The LGMP Client
Configuration dialog box opens (Figure 6-157).
Parameter Definition
Enable State Select to enable or disable LGMP client. The
default value is Disabled.
LGMP Clients Displays the number of LGMP clients per VLAN
and opens the LGMP Client Displays per VLAN
dialog box.
LGMP Message
Reception
Statistics • Report - Displays the number of LGMP
report messages received.
• Leave - Displays the number of LGMP leave
messages received.
• End Session - Displays the number of
LGMP end session messages received.
• Router Report - Displays the number of
LGMP router report messages received.
• Router Leave - Displays the number of
LGMP router leaves messages received.
• Invalid - Displays the number of LGMP
messages received with an invalid payload.
Intelligent
Multicast
Session
Statistics • New Client Ports Added - Displays the
number of new clients added by LGMP.
• Existing Client Ports Removed - Displays
the number of clients removed by LGMP.
• Existing Sessions Removed - Displays the
number of sessions removed by LGMP.
• New Router Ports Added - Displays the
number of new routers added by LGMP.
• Existing Router Ports Removed -
Displays the number of new routers
removed by LGMP.