Avaya P580 - Manual (Page 148)

4-18 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Chapter 4
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
4. Select a VLAN name from the Bridge column (Figure 4-9)to
set the bridge parameters. The Spanning Tree Bridge
Configuration dialog box opens (Figure 4-10).
Figure 4-8. Spanning Tree Bridge Configuration Dialog Box
Status Indicates whether a bridge is enabled or disabled
Bridge ID This bridge’s ID
Bridge Ports The number of ports in this bridge
Designated
Root Displays the Root bridge for this spanning tree
Root Port Bridge port used to access the root bridge
Root Cost Path cost to the root bridge
Topology
Changes Number of topology changes that have occurred since the last system
reset
Time Since
Topology
Change
(hh:mm:ss) Number of hours, minutes, and seconds since the last topology change
Table 4-3. Spanning Tree Information Configuration Field Options
Parameter Definition