Avaya P580 - Manual (Page 670)

-24
Chapter
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
<source-wildcard> | any | host <source-ip-addr>} [{lt <port> | eq
<port> | gt <port> | range <port> <port>}] {<dest-ip-addr> <dest-
wildcard> | any | host <dest-ip-addr>} [{lt <port> | eq <port> | gt
<port> | range <port> <port>}] [established]
Keywords,
Arguments, and
Options
Table 6-150. Keywords, Arguments, and Options
Keyword, Argument
or Option Definition
<access-list-name> A unique name that identifies the access
control list.
<access-list-index> The unique rule number within the
access list.
permit Forwards the packet without changing its
priority.
use-priority Assigns the priority that you define in the
following <priority> parameter to the
packet.
<priority> The priority that you want to assign to
packets that match this ACL. Enter a
number between 0 and 7.
use-diffserv Classifies traffic by the DSCP in the
packet.
[mask] Masks the three least significant bits of
the DSCP.
If you mask the three least significant bits
of the DSCP, the switch recognizes the
remaining bits as the precedence field of
the type of service (TOS) field and
classifies the packets accordingly.
remark-diffserv Replaces the DSCP in the packet with the
DSCP that you enter for the following
<dscp> parameter.
The switch uses the DSCP that you enter
for the <dscp> parameter to classify the
packet.
<dscp> The DSCP that you want to replace the
DSCP of the packet.
1 of 3