Avaya P580 - Manual (Page 467)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 12-11
Configuring IPX Routing
Figure 6-98. Add IPX Static Route Dialog Box
4. Refer to Table 6-67 to configure the IPX Static Route
parameters.
5. Click APPLY to save your changes, or CANCEL to restore
previous settings.
6. To view or modify IPX Static Routes, select Static Routes from
Routing > IPX > Configuration group on the Web Agent
window. The configured IPX Static Routes dialog box opens
(Figure 12-8)
Table 6-67. IPX Static Route Parameters
Parameter Allows you to ...
Network Enter the IPX network number that you want to
assign to the IPX static route.
Next-Hop Node Enter the MAC address for the next destination to
which the packet is routed. Format of the value to
enter is aa:bb:cc:dd:ee:ff.
Interface View the IPX Interface associated with the next hop.
Ticks Enter the amount of time (in ticks) that the packet
takes to reach the network number you specified. A
tick is approximately 1/18th of a second.
Hops Enter the number of routers (hops) that the packet
must pass through before reaching the network
number associated with the IPX network.