Avaya P580 - Manual (Page 364)

9-78 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Display the
Multicast group
table from the
CLI
To display the multicast group table using the CLI, enter the
following command from configuration mode:
(configure)# show ip igmp groups
Displaying the IGMP Local Multicast Forwarding Cache
To display the multicast forwarding cache information (IGMP only
interfaces):
1. Select Local Multicast Forwarding Cache from the
Routing > IGMP group on the Web Agent window. The
Local Multicast Forwarding Cache dialog box opens.
Figure 6-53. Local Multicast Forwarding Cache Dialog Box
2. To modify the Local Multicast Forwarding Cache, select an
entry and:
Group Created On Time at which the group was created on the router.
Group Multicast Protocol Routing protocol being used for the group. If no routing
protocol is being used on the interface a group is on, this
column displays IGMP.
Group Reporter Address IP address of the host that sent the most recent host
membership report for this group.
Entry Expiration Period in
(sec) Expiration time (in seconds) of the group that is being
displayed.
Table 6-30. IGMP Group Membership Table Dialog Box Parameterscontinued
Parameter Defines the...