Avaya P580 - Manual (Page 516)

15-10 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
11. Enter the new network range start number in the Network
Range Start field.
12. Enter the new network range end number in the Network
Range End field.
13. Enter the new network number to be associated with the
interface in the Network Number field.
14. Enter the new node number to be associated with the
interface in the Node field.
15. Select Enable from the Admin. State field pull-down
menu.
16. Select the new default zone associated with the interface
from the Default Zone field pull-down menu.
17. Select the AppleTalk interface that you want to update in
the Select column.
18. Click APPLY to save your changes, or CANCEL to restore
previous settings.
* Note: You may select and change multiple interfaces
simultaneously with one APPLY operation.
Using the CLI
To edit an AppleTalk interface using the CLI, enter the following
command from Interface mode:
(config if-:<interface-name>)# appletalk <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Deleting an AppleTalk Interface
You can delete an AppleTalk interface using either the Web Agent
or the CLI.
Using the Web
Agent
To delete an AppleTalk interface using the Web Agent:
1. Select Interfaces from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Interfaces dialog box opens (Figure 6-124).