Avaya P580 - Manual (Page 362)

9-76 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Displaying IGMP
Interface
Statistics Using
the CLI
To display the IGMP Interface Statistics window using the CLI, enter
the following command from configuration mode:
(configure)# show ip igmp statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Neighbor Querier Timeout
(sec) Amount of time (in seconds) remaining before this
interface assumes the role of designated querier. This
timer is reset to the value entered for the Neighbor
Querier Timeout Interval each time an IGMP query is
received from a neighbor with a lower IP address. If no
response is received in the allowed time, the switch will
become the designated querier on this interface.
Applicable only if IGMP V2 is used.
Group Join Requests
Received Number of new groups on this interface.
Group Leave Requests
Received Number of leave requests received on this interface.
Group Reports Received Number of reports received on this interface in response
to a group membership query. Hosts respond to a Query
by generating Host Membership Reports reporting each
host group to which they belong on the network interface
from which the Query was received.
Query Messages Received Number of query messages received from other multicast
routers.
Query Messages
Transmitted Number of query messages sent by a multicast router.
These messages are sent to discover which host groups
have members on their attached local networks. Queries
are addressed to the all-hosts group (address 224.0.0.1),
and carry an IP time-to-live of 1.
Unknown Messages
Received IGMP messages received with an unsupported type.
Number of Current
Groups Number of groups on each interface for which there are
entries in the Group Membership Table.
Table 6-29. IGMP Interface Statistics Dialog Box Parameters continued
Parameter Defines the...