Avaya P580 - Manual (Page 561)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-19
Managing Intelligent Multicasting
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure 6-153).
Figure 6-153. Static Multicast Sessions Clients Port Dialog Box
3. Enter the new port number to be added in the Port field,.
4. Click Add Client Port. The new port is added.
Using the CLI
To create a static client port using the CLI, enter the following
command from Configure mode:
(configure)# set intelligent-multicast static-
client-port <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Deleting Static Client Ports
Static client ports can be deleted from either the Web or the CLI.
Using the Web
Agent
To delete static client ports using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 6-152).
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure 6-153).
3. Select a port and click DELETE to remove the static client
port, or CANCEL to restore previous settings.