Avaya P580 - Manual (Page 402)

9-116 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
6. Enter the IP address of the gateway associated with this static
route in the Next-Hop Address field.
7. Click CREATE to save your changes, or CANCEL to restore
previous settings. The IP Static Routes window re-opens.
8. Click APPLY to save your changes, or CANCEL to clear
your selection.
Configuring the IP Interface for the PPP Console
You can configure an IP interface for the PPP console from either
the Web Agent or the CLI.
Using the Web
Agent
To configure the PPP console with an IP address and mask using the
Web Agent:
1. Configure your console serial port as a PPP Console. See
“Connecting a Modem”, in Chapter 2, “Initialize and Setup”.
2. Connect your modem cable to the switch’s serial port.
3. Select Interfaces from Routing > IP > Configuration on
the Web Agent window. The IP Interfaces dialog box opens
(Figure 6-62).
4. Select CREATE. The Add IP Interface dialog box opens
(Figure 6-71).