Avaya P580 - Manual (Page 228)

5-48 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
Slot 6 has 10/100 ethernet ports that are
unsupported and will not be set.
* Note: IEDR is only supported for 50 and 80 series Gigabit
modules.
Internal-error-config enabled on port 7/1
Internal-error-config enabled on port 7/2
Internal-error-config enabled on port 7/3
Internal-error-config enabled on port 7/4
Feature enabled for port(s) specified
If CRC Error Threshold is exceeded then port
will automatically be shut down.
TRAFFIC LOSS WILL RESULT if no redundant port
is configured and port shutdown occurs.
To UNDO use: "set port internal-error-
shutdown {slot/port} disable"
■
Upon Failure:
The set port internal-error-shutdown all-ports disable
command produces system messages similar to the following:
■
Upon Success:
Internal-error-config disabled on port 3/1
Internal-error-config disabled on port 3/2
Internal-error-config disabled on port 4/1
Internal-error-config disabled on port 4/2
Internal-error-config disabled on port 4/3
Internal-error-config disabled on port 4/4
Slot 6 has 10/100 ethernet ports that are
unsupported and will not be set.
Internal-error-config disabled on port 7/1
Internal-error-config disabled on port 7/2
Internal-error-config disabled on port 7/3
Internal-error-config disabled on port 7/4
Feature disabled for port(s) specified
Port(s) will not be shut down if CRC Threshold
Exceeded.
■
Upon Failure:
Don’t Shutdown all ports failed