Avaya P580 - Manual (Page 79)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 2-21
Initialize and Setup
Figure 2-14. Create SNMP Community Dialog Box
3. Enter a name for the SNMP community in the Community
String field.
4. Select an option from the IP Address field pull-down menu.
The options are:
• Any – for any IP address
• Specific – Enter an IP Address.
* Note: You cannot enable the trap receiver if you select
Any.
5. Select an access level for this community from the Access
field pull-down menu. Refer to Table 2-3 for the Access level
field options.
Table 2-3. Access Level Field Options
Access Level Manager Can... Manager
Cannot...
Read-Only View switch configuration
settings and statistics. View community
strings. Change switch
configurations.
Read-Write View and set switch
configuration settings, and
view statistics. View community
strings.
1 of 2