Avaya P580 - Manual (Page 173)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 4-43
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
Using the CLI
To view details about hunt group members using the CLI, enter the
following command in configuration mode:
<configure># show huntgroup <huntgroup-name>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
To add ports to a hunt group using the CLI, enter the following
command from Configure mode:
<configure># set port huntgroup
{<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]<huntgroup-
name>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Removing Ports from Hunt Groups
You can remove a port from a hunt group by using either the Web
Agent or the CLI.
Using the Web
Agent
To remove a port from a hunt group by using the Web Agent:
1. Open the Switch Port Configuration window for the port
that you want to remove.
2. Click None in the Hunt Group field.
3. Click Apply.