Avaya P580 - Manual (Page 405)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1 10-1
10 Configuring the Routing
Information Protocol (RIP)
Overview
* Note: To globally enable RIP, refer to Chapter 9, "Configuring
IP Routing".
The information and procedures provided in this chapter pertain to
50 series layer 3, and Licensed 80 series module configurations only:
This section describes:
■
Configuring RIP on the Switch
■
Modifying RIP Interfaces
■
Creating Trusted RIP Neighbors
■
Viewing RIP Statistics
■
Key Chains
■
NBMA IP Interfaces
Configuring RIP on the Switch
You can configure the RIP from either the Web Agent or the CLI.
* Note: MD5 authentication in the 5.X versions of switch
software is not compatible with MD5 authentication in
earlier versions of the software.
If you enable MD5 authentication on a switch that is
running 5.X software and on a switch that is running
4.X software, the switches do not exchange routing
information.