Creating ip static routes using the web agent – Avaya P580 User Manual
Page 330
9-44
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Creating IP
Static Routes
Using the Web
Agent
To create IP static routes using the Web Agent:
1. Select Static Routes from the Routing > IP >
Configuration group on the Web Agent window. The IP
Static Routes dialog box opens (Figure 9-10).
Figure 6-34. Add IP Static Route dialog box
2. Refer to Table 6-19 to configure the IP Static Route dialog
box parameters:
3. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Table 6-19. IP Static Route Parameters
Parameter
Allows you to...
Network Address
Enter an IP network address for your IP static route.
Mask
Enter an IP subnet mask for your IP static route.
Next-Hop Address
Enter an IP address for the gateway associated with
the IP static route.
Cost
Enter the metric between this router and the
destination.
Preference
Select a low or high routing preference from the
Preference field pull-down menu.