Avaya P580 - Manual (Page 257)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 6-27
Managing the Address Forwarding Table
6. Use the following command to set the intrusion trap timer to
other than the default setting:
set port intrusion-trap-timer <mod-swport-range>
<intrusion-trap-timer-value>
SNMP
The MIB objects that you use to perform this procedure are located
in ProminetMib.txt, version 5.2.
To use SNMP to enable the MAC Address Lock feature and traps for
unknown source addresses:
1. Use the MIB objects that are listed in Table 6-8 to manually
add the “permitted” MAC addresses to the AFT.
2. Use the MIB object that is listed in Table 6-9 to disable
learning on a port.
Table 6-8. MIB, MIB Objects, and OIDs for Adding AFT Entries
MIB MIB Object OID
ProminetMib.txt,
version 5.2 promL2AddressControlIndex 1.3.6.1.4.1.2167.5.1.4.3.1.1
promL2AddressControlMacAddress 1.3.6.1.4.1.2167.5.1.4.3.1.2
promL2AddressControlPortBinding 1.3.6.1.4.1.2167.5.1.4.3.1.3
promL2AddressControlVlanID 1.3.6.1.4.1.2167.5.1.4.3.1.4
promL2AddressControlPriority 1.3.6.1.4.1.2167.5.1.4.3.1.5
promL2AddressControlPersistence 1.3.6.1.4.1.2167.5.1.4.3.1.6
Table 6-9. MIB, MIB Object, and OID for Disabling Learning
MIB MIB Object OID
ProminetMib.txt,
version 5.2 promSwitchPortLearningMode 1.3.6.1.4.1.2167.5.2.1.1.4