Avaya P580 - Manual (Page 198)

5-18 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
Figure 5-5. Detailed Physical Port Configuration Dialog Box for
Port on Fast Ethernet Module
7. Enter a port name in the Name field, if desired or use the
default name.
8. Select one of the following from the Category field pull-
down menu:
— User Port if this is an end-station port
— Service Port if this is a trunk port.
9. Select a speed (10 Mb/s or 100 Mb/s) from the Speed Mode
field pull down menu, If you want to set the port speed
manually. If want the port to autonegotiate, you can ignore
this field.
* Note: This feature is only available for 10/100 TX
modules.
10. Select a duplex mode (half-duplex or full-duplex) from the
Duplex Mode field pull-down menu if you want to
manually set the port’s duplex mode. You do not have to
select a duplex mode if you set the port to autonegotiate.