Setting the iedr threshold for internal errors, Viewing iedr settings, Viewing iedr settings for hunt groups – Avaya P580 User Manual
Page 226
5-46
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
1. Enter Global Configuration mode.
The CLI displays the
<configure>#
prompt.
2. Enter the following command:
set huntgroup internal-error-shutdown enable
To globally disable IEDR for all ports in hunt groups, enter:
set huntgroup internal-error-shutdown disable
Setting the IEDR Threshold for Internal Errors
You can set the threshold at which the switch will shutdown a port.
By default this threshold is set to 10 internal errors in a 5-second
time period. You can set the threshold to any number between 5
and 500 internal errors in a 5-second time period. This setting is
global for all ports that have been enabled for IEDR including ports
configured for Hunt groups.
To set the IEDR threshold:
1. Enter Global Configuration mode.
The CLI displays the
<configure>#
prompt.
2. Enter the following command:
set internal-error-threshold <threshold>
Viewing IEDR Settings
To view a list of the ports that have IEDR enabled:
1. Enter Global Configuration mode.
The CLI displays the
<configure>#
prompt.
2. Enter the following command:
show port internal-error-config
Viewing IEDR Settings for Hunt Groups
To view the global IEDR setting for hunt groups: