Avaya P580 - Manual (Page 498)

14-6 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Type Enter the service type that identifies the type of
service the server provides.
Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services [NDS] (278)
A value of ffff matches all service type values.
Direction Select the filter direction from the following
pull-down menu options:
• Inbound - Applies the filter only to SAP
packets received on the interface.
• Outbound - Applies the filter only to SAP
packets sent on the interface (Default)
• Both - Applies the filter to SAP packets both
sent and received on the interface.
Filter/Suppress Select to enable or disable whether the services
matching Name and Type are filtered (inbound) or
suppressed (outbound).
• Filtered - Applies the filter only to SAP
packets received (inbound direction) on the
interface.
• Suppressed - Applies the filter only to SAP
packets sent (outbound direction) on the
interface.
Select Enable to filter/suppress traffic. Select
Disable to disable the filtering and suppression of
traffic.Default value is Enable.
Hops Specify the number of routers (hops) that the packet
must pass through before reaching the service(s)
matched by the filter. This entry is used to override
the value in the SAP packet.
Entering 0 ensures that there is no override in the
transmission of data on the network.
Table 6-80. IPX SAP Name Filter Dialog Box Parameters
Parameter Allows you to...