Avaya P580 - Manual (Page 428)

11-10 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter
4. In the Admin. State column for the interface that you want
to modify, select DOWN.
This step disables the interface and must be performed before
you perform any OSPF modifications.
5. Click Apply.
6. In the navigation pane, expand the Routing > IP > OSPF
folders.
7. Click Interfaces.
The OSPF Interfaces Web page is displayed in the content
pane (Figure 11-4).
Figure 6-81. OSPF Interfaces Dialog Box
8. Select the Select check box for the interface that you want to
modify.
9. Modify the OSPF interface as necessary. Refer to Table 6-55
for an explanation of each field on this Web page.
10. Click Apply.
11. Reenable the interface:
a. In the navigation pane, expand Routing > IP >
Configuration folders.
b. Click Interfaces.
The IP Interfaces Web page is displayed in the content pane.
c. Select the Select check box for the interface that you want
to reenable.
d. In the Admin. State column for the interface that you
want modified, select UP.