Avaya P580 - Manual (Page 77)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 2-19
Initialize and Setup
6. Select an access type from the Access Type field pull-down
menu. The options are:
■
READ_ONLY
■
READ_WRITE
■
ADMINISTRATOR
■
Custom Access Types - The Custom Access list names you
created will display (previously configured Custom Access
Type see the section “Creating a Custom Access Types” for more
information)
7. Click in the checkbox to select the Management Type for
the user.
■
Local CLI, from the Supervisor’s serial console
■
Remote CLI, through a Telnet Session
■
Web, management from the Web agent
8. Select Apply to create the user account and a access type or
select Cancel to ignore.
Setting Up User
Accounts Using
the CLI
To setup a user account using the CLI, enter the following command
in Configuration mode:
<configure>#username <name> password [encrypted-
type1] <passwd> [access-type {read-only|read
-write|admin|<catName>}] [mgmt-type [all][local-
cli][remote-cli][web]]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Disabling User Accounts
Web Agent
Procedure
For security reasons, you may want to disable certain user accounts,
such as the manuf and diag accounts.
To disable user accounts by using the Web Agent:
1. Expand the System > Administration folders.
2. Select User Accounts.
The User Account Management Web page opens.