Avaya P580 - Manual (Page 107)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 2-49
Initialize and Setup
Using the CLI
To save your running configuration as your startup configuration in
NVRAM using the CLI, enter the following command in Enable
mode:
># copy running-config startup-config
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Copying Files
You can copy files to and from multiple locations. For example, if
you modify the running configuration and you want to reinstate
your startup configuration parameters, you can copy your startup
configuration to your running configuration in volatile RAM. You
can also upload or download configuration files by copying files
from a TFTP server directory to the switch or to a startup or running
configuration file. You can copy files using either the Web Agent or
the CLI.
Using the Web
Agent
To copy files using the Web Agent:
1. Select File Management from the System > Configuration >
Configuration Files group on the Web Agent window. The
Configuration File Management dialog box opens (Figure 2-
23).