Hardware requirements for ip routing, Software requirements for ip routing – Avaya P580 User Manual

Page 288

Advertising
background image

9-2

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

Chapter

For more detailed information on the switch routing operations, see
“Routing with Layer 2 and Layer 3 Modules”, in Chapter 1,
Introduction”.

Figure 6-25. Intra and Inter VLAN Bridging and Routing

Hardware Requirements for IP Routing

To configure your switch as an IP router, you must configure your
switch with the following hardware:

Layer 3 supervisor module

* Note: Licensed layer 3 80-series media modules are

recommended for best routing performance.

Software Requirements for IP routing

To configure your switch as an IP router, with 80 series modules
(Supervisor and Media modules) you must configure your switch
with a minimum of version 5.0 and above.

Advertising
This manual is related to the following products: