Creating ip static routes, Creating ip static routes -43 – Avaya P580 User Manual
Page 329
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
9-43
Configuring IP Routing
As long as these totals stay under 70K, it is safe to increase the IP
Unicast Maximum Entries to prevent overflow. If the switch is not
routing IPX or has minimal IP Multicast traffic, it is generally safe to
double the IP Unicast maximum to 30000.
You can do this from either the switch Web Agent or the switch CLI.
To double the IP Unicast maximum to 30000 from the Web Agent,
select:
Routing>L3 Forwarding Cache>Cache Configuration> IP
Unicast Maximum Entries >
To double the IP Unicast maximum to 30000 from the CLI, enter the
following CLI command in Configure mode:
<configure># ip unicast route-cache max-size 30000
Important: Changing the Maximum Cache Entries parameter
affects every L3-enabled F-chip on the P580/P882.
Creating IP Static Routes
You can create IP static routes using either the Web Agent or the
CLI.