Avaya P580 - Manual (Page 347)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 9-61
Configuring IP Routing
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Modifying the
DVMRP
Interface Using
the CLI
To configure the DVMRP Interface using the CLI:
(configure-if:<interface># ip dvmrp <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Monitoring Switch Performance Using IP
Statistics
This section provides detailed information on the analysis and use of
IP and IP multicast statistics.
IP routing statistic options include:
■
Displaying Global IP Routing Statistics using the Web Agent
■
Searching the IP Routing Table
■
Displaying the IP Routing Table Statistics
■
Searching the IP ARP Cache
Src Host Addr in Prune Msg Select Disable to send prune messages with only the
subnet portion of the source address.
The default is Enable (sends prune messages with the
full source host address).
Interface Scope Select the minimum TTL (time-to-live) required for a
packet to leave this interface. The options are None,
127, and 255.
Table 6-23. DVMRP Interface Parameters continued
Parameter Defines the...