Avaya P580 - Manual (Page 41)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 1-13
Introduction
80-Series Modules
The Avaya P550R/P580/P880/P882 Multiservice switches support
the following 80-Series modules:
■
4-port, Gigabit Interface Card (GBIC) based module — This
module can be configured with up to 4 GBIC optical modules
and the GBIC optical modules can support the following
distances:
— 850 nM for multimode fiber (1000BASE-SX) — 550M
(50 micron only)
— 1310 nM for singlemode fiber (1000BASE-LX) — 10Km
— 1550 nM for singlemode fiber (1000BASE-LX,
non-standard) — 80Km
* Note: If you use the 1000BASE-SX GBIC with single mode
fiber, you must use mode conditioning patch cords with
a maximum distance of 500m.
■
8-port, GBIC based module — This module can be configured
with up to 8 GBIC optical modules.
The 8-port GBIC module can support the following GBIC-
type connectors:
— 850 nM for multimode fiber (1000BASE-SX) — 550M
(50 micron only)
— 1310 nM for singlemode fiber (1000BASE-LX) — 10Km
— 1550 nM for singlemode fiber (1000BASE-LX,
non-standard) — 80Km
* Note: If you use the 1000BASE-SX GBIC with single
mode fiber, you must use mode conditioning
patch cords with a maximum distance of 500m.
■
24-Port 10/100BASE-TX Ethernet module (layer 2 and layer
3 support), with 24 RJ-45 Ports – 10/100, Half Duplex
(HDX)/Full Duplex (FDX) (M8024R-100TX)
■
24-Port 100BASE-FX Ethernet module (layer 2 and layer 3
support), with 24 MT-RJ ports multimode fiber, 2Km
(M8024R-100FX)
■
48-Port 10/100BASE-TX Ethernet module (layer 2 and layer
3 support), with 4 RJ-21 Telco connectors - 10/100, HDX/
FDX, 100M (M8048R-100TC)