Avaya P580 - Manual (Page 461)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 12-5
Configuring IPX Routing
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
CLI Commands
To enable IPX routing globally using the CLI, enter the following
command from Configure mode:
<configure># ipx routing
To enable IPX routing Globally
<configure> no ipx routing
To disable IPX routing Globally
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Configuring IPX Interfaces
You can create new IPX interfaces and configure up to four
interfaces of different encapsulation types to a VLAN (multinetting).
You can configure an IPX interface using either the Web Agent or
the CLI.
Web Agent
Procedure
To create a new IPX interface using the Web Agent:
1. Select Interfaces from Routing > IPX > Configuration
group on the Web Agent window. The IPX Interfaces dialog
box opens (Figure 6-96).
Maximum
Number of
Routes Enter the maximum number of routes that can be added
to the routing table. The switch rounds your entry to the
nearest power of 2. For example, if you enter 1000, the
system rounds this number up to 1024 routes. The default
value is 2048.
Maximum
Number of
Services Enter the maximum number of services that can be added.
The switch rounds your entry to the nearest power of 2.
For example, if you enter 1000, the system rounds this
number up to 1024 services. The default value is 2048.
Table 6-65. IPX Routing Global Configuration Dialog Box Parameters
Parameter Allows you to ...