Avaya P580 - Manual (Page 569)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-27
Managing Intelligent Multicasting
3. Click...
— APPLY to save your changes.
— CANCEL to restore previous settings.
Using the CLI
To configure the LGMP server using the CLI, enter the following
command from Configure mode:
<configure># set lgmp server <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Viewing the LGMP Server Statistics
You can view the LGMP server statistics using either the Web Agent
or the CLI.
Using the Web
Agent
To enable/view the LGMP server using the Web Agent:
1. Select LGMP Snooping from the L2 > Intelligent
Multicast group on the Web Agent window. The LGMP
Server Configuration dialog box opens (Figure 16-12).
2. Select Enable from the State field, if it is not already
displayed.
3. Click CLEAR to clear the statistics or REFRESH to refresh
the contents of the table.
Using the CLI
To view the LGMP server statistics using the CLI, enter the following
command from Configure mode:
<configure># show lgmp server statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.