Avaya P580 - Manual (Page 575)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-33
Managing Intelligent Multicasting
* Note: You must enable intelligent multicasting on a
global basis to activate LGMP client
configuration.
2. Select Enable from the State field pull-down menu, if it is not
already displayed.
3. Select APPLY to complete the operation, or CANCEL to
ignore the operation.
Using the CLI
To enable an LGMP client using the CLI, enter the following
command from Configure mode:
<configure># set lgmp client enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Viewing LGMP Clients Statistics
You can view LGMP clients statistics using either the web agent or
the CLI.
Using the Web
Agent
To view LGMP Client statistics using the web:
1. Select LGMP Client from the L2 > Intelligent Multicast
group on the Web Agent window. The LGMP Client
Configuration dialog box opens (Figure 6-157).
2. Refer to Table 6-105 for an explanation of the LGMP Client
Configuration dialog box parameters
3. Click CLEAR to clear the statistics, or REFRESH to refresh
the contents of the table.
Using the Web
To view LGMP Client statistics using the CLI:
To view the LGMP client statistics using the CLI, enter the following
command from Configure mode:
<configure># show lgmp client statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.