Viewing the event and shutdown logs, Viewing the event and shutdown logs -12, Using the cli – Avaya P580 User Manual
Page 592: Using the web agent
17-12
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Using the CLI
To configure the protocol event log using the CLI, enter the
following command from Configuration mode:
<configure># logging protocol event <protocol>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Viewing the Event and Shutdown Logs
You can view the Event and Shutdown logs using either the Web
Agent or the CLI.
Using the Web
Agent
To view the Event and Shutdown logs using the Web Agent:
1. Select either Event Log or Shutdown Log from the Events
group on the Web Agent window. The Event Log Search
dialog box (Figure 6-164) or the Shutdown Log Search
dialog box opens (Figure 6-165).
Trace
Select Enable to display RIP and OSPF packet tracing.
The default is Disable.
Debug
Select Enable to display event messages used to
troubleshoot a network problem. The default is
Disable.
Table 6-111. Protocol Event Management Dialog Box Parameters
continued
Column
Heading
Parameter