Avaya P580 - Manual (Page 81)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1 2-23
Initialize and Setup
Setting Up
SNMP
Communities
Using the CLI
To set the SNMP communities parameters using the CLI, enter the
following command:
<configure># snmp-server community
<community-string>{none|ro|rw}[{normal|
admin}] <catName|ip-addr|admin|normal>
<CR|IP-Addr>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
* Note: To disable SNMP, you must set the access for all
community strings to None. You cannot disable SNMP
by deleting all community strings because the public
community string is restored when you reboot the
switch.
9. Select or de-select the accessible features you want or want to
remove for this access type from the Accessible Features
list.
10. Select Apply to save the modification to the specific access
type or Cancel to ignore the modifications.
Configuring User Accounts
You can add a custom access type to a user through the User
Accounts field.
To add a custom access type to a user:
1. Select System>Administration from the left side of the
switch web screen.
2. Select User Accounts. The User Accounts web screen
displays.
3. Select Add. The Add User Account web screen displays.
4. Type a user name in the User Name field. The user name
may contain up to 32 characters.
5. Type a password in the Password field and re-type the
password in the Re-enter Password field. The password
may contain up to 32 characters.