Ricoh FAX5600L - Manual (Page 101)

Transfer Request
Transfer Request helps you save costs when you send the same message to
more than one place in a distant area.
❐ Your machine sends the message to the Transfer Station, which holds it in
memory.
❐ The Transfer Station then sends it on to each of the End Receivers in
sequence.
❐ After broadcasting, the Transfer Station sends your machine a Transfer Result
Report to tell you if there were any problems with the communication.
Note: ❐ This feature can only be used if the Transfer Station was made by the
same maker as your machine.
❐ The ID Code of your machine must be the same as the ID Code of the
Transfer Station.
❐ Your fax machine’s telephone number must have been programmed in
advance.
❐ The Transfer Station must have memory space available, and must be
able to act as a Transfer Station (some machines cannot do this, or
can but the capability has been switched off).
You cannot dial the End Receivers as full numbers on your ten-key pad, and you
cannot use your own stored Speed Dials, Quick Dials, and Groups. You must use
the numbers that are stored in the Transfer Station. Always keep a copy of the
Transfer Station’s Telephone Lists (Quick Dial, Speed Dial, and Group Lists) near
the machine if you plan to use Transfer Request.
Cross-reference
Quick Dial and Speed Dial: see pages 29 and 31. Groups: see page 30.
ID Code: see page 85.
Telephone Lists: see p. 192.
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES NETWORKING
87