Ricoh FAX5600L User Manual
Page 114
Storing a Keystroke Program
1. Make sure that the machine is in
standby mode (see page 49).
2. Place a sheet of paper in the feeder.
❐ Skip step 2 if you are making a Polling
Reception program.
3. Select all required features (such as
Transfer Request) and telephone num -
bers as you would normally do.
❐ Contrast, resolution, and halftone cannot
be stored in a keystroke program.
4. Press the Quick Dial key that you wish
to store the program in.
Example:
01
❐ Make sure that this key is vacant.
5. To complete the program:
Yes
Note:
The procedure that you just stored will now begin. If you do not
wish to use the procedure now, press
Stop
immediately.
MEMORY TRANS. OPTIONS
ENTER FAX NUMBER
_
MEMORY TRANS. OPTIONS
ENTER NO. OR
START
DEST: 2
_
PROGRAM?
YES
OR
NO
TRANSMISSION
ADVANCED FEATURES
100