Ricoh FAX5600L - Manual (Page 78)

Auto Reduce Home Position Adjustment
You can change the home position of the Auto Reduce setting if you wish. Do not
do this unless the current home position is inconvenient for you, and you often
find yourself having to change the Auto Reduce setting before sending a fax.
The procedure is as follows (see page 10 for more information about the User
Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
❐ At this time, you can print a User
Parameter List if you press
→
Start
.
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 04
are shown. You need to change digit 2.
4. If you wish to change the setting, press 2 .
5. Finish: Yes Function
TTI
Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch TTI off.
Note: If you switch TTI off, make sure that Label Insertion is also off if you want
the image received at the other end to be unmarked.
Cross-reference
TTI: see page 26.
Label Insertion: see page 120
1. Either:
❐ Press ↓
0 7
❐
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000 YES TO END
Digit 2
0: Auto Reduce is Off
1: Auto Reduce is On.
OPTION SELECT YES TO END
AUTO REDUCE ON OFF
TTI
If you have previously
programmed this feature as a
User Function Key, press that
key.
SENDING A FAX MESSAGE ROUTINE OPERATION
64