Ricoh FAX5600L - Manual (Page 201)

Transmission Deadline Report/Polling Confirmation List
If you selected the TRD (Transmission Deadline) option, this report will be printed
when the deadline passes. The report will tell you whether the transmission was
completed before the deadline or not. If you selected TRD with Polling, the Polling
Confirmation List will be printed instead.
Switching Reports On/Off
Some of these reports can be switched on or off.
To switch a report on or off, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 02
are shown.
Each digit from 0 to 7 controls one of the
reports, except digit 1, as follows.
Digit Purpose
0
Transmission result report (memory transmission)
0: Off 1: On Default Setting: On
1 Do not change this setting.
2 Memory storage report 0: Off 1: On Default Setting: Off
3 Polling reserve report 0: Off 1: On Default Setting: Off
4 Polling result report (polling reception) 0: Off 1: On Default Setting: On
5
Transmission result report (immediate transmission)
0: Off 1: On Default Setting: On
6 Polling clear report 0: Off 1: On Default Setting: On
7 TCR 0: Off 1: On Default Setting: On
4. If you wish to change a setting, press the appropriate key on the keypad. For
example, to change digit 2, press 2 .
5. Finish: Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000 YES TO END
2 3 4 5 6 7 0
R
E
P
O
R
T
S
REPORTS AUTOMATICALLY PRINTED REPORTS
187