Ricoh FAX5600L - Manual (Page 211)

Ordering Toner
When you run out of toner, you can dial your dealer, and input the amount of toner
needed. The machine will generate an order form and send it to your dealer.
To use this feature, you must do the following in advance:
❐ Switch this feature on (see below).
❐ Store the fax number of your dealer in Quick Dial Key 64. See page 31 for how
to store a number in a Quick Dial Key.
If you wish to use Quick Dial 64 for other purposes, you must switch Ordering
Toner off.
Switching the Ordering Toner Feature On/Off
To switch this feature on or off, do the following. (See page 10 for more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 04
are shown.
The setting you need to use is digit 7.
4. If you wish to change the setting, press 7 .
5. Finish: Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000 YES TO END
Digit 7
0: This feature is Disabled.
1: This feature is Enabled.
L
O
O
K
IN
G
A
F
T
E
R
T
H
E
M
A
C
H
IN
E
LOOKING AFTER THE MACHINE REPLACING THE TONER CASSETTE
197