Ricoh FAX5600L - Manual (Page 145)

Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine’s memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 10 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
❐ At this time, you can print a User
Parameter List if you press →
Start
.
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 05
are shown.
The setting that you need to change is
that for digit 3.
4. If you wish to change the setting, press 3 .
5. Finish: Yes Function
Cross-references
Substitute Reception: see page 75.
Confidential Reception: see page 126.
Memory Lock: see page 129. Forwarding: see page 134.
Action as a Transfer Station: see page 87.
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000 YES TO END
Digit 3
0: Messages are not rejected.
1: Messages are rejected.
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES RECEPTION
131