Ricoh FAX5600L - Manual (Page 187)

6. Mark either the ON or the OFF box for Voice Request, Economy
Transmission, Secure Transmission, Auto Reduction, TTI, and ID
Transmission.
Transfer Request Program Sheet
You can use this sheet when you make a Transfer Request.
1. At the top of the sheet, next to Trans. Mode, mark up either the box above
"Memory" or the box above "Immediate".
2. Mark up the required contrast, resolution, and halftone type. Also, indicate
whether the marker should be ON or OFF, and whether your transmission is in
Group 3 or Group 4 mode.
3. Input the number of the Transfer Broadcasting Station. To do this, either:
❐ Write the full telephone number of the Transfer Broadcasting Station in the
"Transfer Station (Full No.)" field. See "Number Fields" on page 168 for
how to write numbers on OMR Sheets.
❐ Mark one of the Quick Dials in the "Transfer Station (Quick Dial)" row of
boxes.
❐ Mark one of the Speed Dials in the "Transfer Station (Speed Dial)" row of
boxes.
NOTE: You can only enter one Transfer Broadcasting Station on the OMR
Sheet.
Refer to page 87 and the pages following for all conditions requi red to
perform a Transfer Request.
4. Mark the end receivers.
❐ You must mark the end receivers as Speed Dials, Quick Dials, and Groups
that are stored in the Transfer Broadcasting Station. Do not input any of
your own stored Quick Dials, Speed Dials, or Groups here.
❐ Confer with the operator of the Transfer Broadcasting Station if you need
their latest list of stored telephone numbers.
Example: If one of the end receivers is stored in the Transfer Broadcasting
Station as Speed Dial 10, mark the box above 10 in the "Receiver (Speed
Dials in Transfer Station)" area.
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES OTHER
173