Ricoh FAX5600L User Manual
Page 70
Selecting the Halftone Type
This model has two types of Halftone, the Dither Process, and the higher quality
Error Diffusion Process. To change the currently used Halftone type, perform the
following procedure.
1.
Function 6 0 2 2 2 2 8 1
2. Scroll through the list of features with
the
↑
and
↓
keys until
SELECT
HALFTONE
appears.
3. Change the setting by using
←
or
→
.
SPD MODE: The machine will use the Basic Halftone Process.
STD MODE: The machine will use the higher quality Error Diffusion Process.
4. Finish:
Yes Function
Halftone Mode slows down the transmission speed, and may increase your
communication costs, especially if you use the Error Diffusion process. Higher
resolutions also do this. This is because these settings create larger amounts of
data to be sent.
Messages are transmitted the fastest if you use the standard resolution
setting, and keep Halftone off.
PSTN LINE TYPE SELECT
DP
TT
YES
TO END
SELECT HALFTONE SELECT
SPD MODE
STD MODE
YES
TO END
SENDING A FAX MESSAGE
ROUTINE OPERATION
56