Ricoh FAX5600L - Manual (Page 99)

2. Yes
3. Input the area code prefix.
4. Yes Function
Storing the ID Code
Before programming the ID Code, confer with other users in your fax network to
agree on an ID Code. This is because communications using ID Codes will fail if
the codes are not the same.
The ID Code can be any four-digit code (using digits 0 to 9 and letters A to F),
except 0000 and FFFF.
In addition to the networking features described in this section, ID Codes are used
with the following communication features. The same code must be used by all
members of your fax network and all people you wish to communicate with using
these features.
❐ Polling: see page 153.
❐ Closed Network: see pages 121 and 152.
❐ ID Transmission: see page 65.
Features using ID Codes can only be used between terminals made by the same maker.
AREA CODE PREFIX
212-5551234
:0 - 9 YES TO END
_
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES NETWORKING
85