Symbols – Ricoh FAX5600L User Manual
Page 20
Most procedures start from standby mode,
that is, when the display is as shown on the
right. The value after "
MEMORY
" shows how
much memory space is remaining.
NOTE: If you start a procedure and do not enter anything at the operation panel for more than
5 minutes, the machine returns to standby mode.
Symbols
The text contains a few symbols that highlight important points or direct you
towards other parts of the manual that are related to the feature currently being
described.
indicates a hint (for example, indicating a page number where
related information can be found).
indicates that you can access the current feature by pressing a
User Function Key provided, if you have already programmed a User
Function Key to perform a particular function.
Using Function 35, you can program User Function Keys as
short cuts to access some features. (See page 163 for more about
programming the User Function Keys).
indicates that you can switch the current feature on or off using
Function 81 or Function 91. Some features must be switched on
before they will work.
indicates that you can operate this feature with an OMR Sheet as
well as from the operation panel. (See page 166 and the pages
following for full details concerning OMR Sheets.)
MEMORY TRANS. APR. 4. 12:25PM
SET DOCUMENT
MEMORY 100%
HOW TO USE THIS MANUAL
6