Ricoh FAX5600L - Manual (Page 170)

Stored ID Override
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1. Place your document in the feeder.
❐ If you only wish to scan a part of the document, use the Specified Image Area feature. See
page 118 for details.
2. Either:
❐
Function 1 3
❐
3. ↓
0 6
4. Enter the ID code that you wish to use
for this message.
Example:
2 5 6 7 Yes
Note: If you see SAME ID FILE EXISTS CLEAR? PRESS YES . NO , you
already have a message on Secured Polling Standby.
❐ To erase the old message:
Yes . The old message is erased and
your new one is stored.
❐ To keep the old message:
No . Input another ID Code .
5. Start
❐ Your fax message is stored and held on polling standby.
NOTE: If you need to cancel a polling transmission operation, use Function 23
(see page 161).
POLLING TRANS. OPTIONS
PRESS START
ID CODE ENTER ID CODE
NO TO END
_
POLLING TRANS. OPTIONS
PRESS START
If you have programmed one of
the User Function Keys to activate
this feature, press that key and go
to step 3.
OTHER ADVANCED FEATURES
156