Ricoh FAX5600L User Manual
Page 160
Multi-sort Document Reception (Memory Card or Hard Disk
Required)
Using this feature, more than one copy of each incoming fax message can be
printed. This feature is useful if you need to reduce your photocopier’s work load.
❐ You will only be able to print one copy if the Two in One feature is enabled. See
page 151 for more about Two in One.
For example, if you switch this feature on overnight, you will not have to make
distribution copies of the messages that came in during the night. However, the
paper in the cassette will be used up much faster.
Cross-reference
Reverse Order Printing: see page 145.
Copying an Original: see page 181.
1.
Function 6 0 2 2 2 2 7 7
2. Input the number of copies that you need, then press
Yes
.
Copies of incoming faxes will be collated.
NOTE: Maximum number of copies: 9
To use Multi-sort Document Reception, you must switched Reverse
Order Printing on. see page 145 for how to do this.
MULTICOPY RX ENTER 1-9 COPY
ENTER # COPY:
1
COPY(S)
YES
TO END
RECEPTION
ADVANCED FEATURES
146