Ricoh FAX5600L - Manual (Page 163)

Reception Time
When you receive a message, the time is printed at the top of the page. However,
this is the time at the transmitting end. To check the local time, you have to print
the TCR.
However, if you switch on Reception Time, the local time is also printed on each
page that you receive. The time is taken from your machine’s internal clock, and
is the same as the time that will be printed on the TCR. Switch this feature on if
you often receive fax messages from other countries.
Cross-references
TCR: see page 185.
Date and Time: see page 24.
To switch this feature on, do the following. (See page 10 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press ↓ until the settings for switch 01
are shown.
The setting that you need to change is
digit 2.
4. If you wish to change the setting, press 2 .
5. Finish: Yes Function
Note: If the message is in the memory for a while (for example confidential re -
ception, memory lock or substitute reception), the printing time is printed
at the top of the page.
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000 YES TO END
Digit 2
0: The reception time will not be
printed.
1: The reception time will be printed.
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES RECEPTION
149