Ricoh FAX5600L - Manual (Page 248)

❐ To type the backslash, you must have programmed one of the User Func -
tion Keys to input a subaddress (see page 163 for how to program a User
Function Key). Press that User Function Key to input the slash, then input
the subaddress.
4. Yes Function
Own ISDN-G3 Number
You can also make Group 3 communications over the ISDN. This procedure is for
storing your machine’s own telephone number for Group 3 communications over
the ISDN.
1. Function 6 0 2 2 2 2
6 1 then ↓ until the screen is as
shown opposite.
2. Yes
3. Input your ISDN number for Group 3 communications.
The format of the number must be as follows: International Dial Prefix,
Your Country Code, Your Area Code, then you must input a Pause, followed
by your telephone number. After that, if your ISDN G3 number contains a
subaddress, type a slash followed by the subaddress number.
Check the International Dial Prefix and your Country Code with your local
telecommunications operator. The example shown below is for the USA; the
codes to add are 011 and 1.
❐ Use the
Pause key to add a pause.
❐ To type the backslash, you must have programmed one of the User Func -
tion Keys to input a subaddress (see page 163 for how to program a User
Function Key). Press that User Function Key to input the slash, then input
the subaddress.
4. Yes Function
OWN ISDN-G4 NUMBER
YES OR CLR . NO
0111212-5551234/2468
_
OWN ISDN-G3 NUMBER
YES TO SET PREVIOUS
NO TO CANCEL NEXT
OWN ISDN-G3 NUMBER
YES TO END
_
OWN ISDN-G3 NUMBER
YES OR CLR . NO
0111212-5551234/2468
_
APPENDIX C. ISDN G4 OPTION TYPE 90
234