Ricoh FAX5600L - Manual (Page 98)

Storing your Machine’s Own Telephone Number
Store your fax terminal’s telephone number using this feature. If you do not do
this, you will not be able to use the Transfer Request feature.
If your fax machine’s telephone number changes, do not forget to change the
stored telephone number data.
1. Function 6 0 2 2 2 2
6 1
↓
2. Yes
3. Input your fax terminal’s telephone number.
❐ The format of the number must be as follows:
International Dial Prefix, Your Country Code, Your Area Code, then you
must add a Pause, followed by your telephone number.
Check the International Dialing Prefix and the Country Code with your local
telecommunications operator. The example shown is for the USA; the
codes to add are 011 and 1.
NOTE: Use the Pause key to add a
pause.
4. Yes Function
Storing your Area Code Prefix
The Area Code Prefix is the digit that is added to area codes when you dial
another area within your own country. In many countries, this code is just a zero.
In Spain, a ’9’ is used, and in the USA, the setting is just left blank.
1. Function 6 0 2 2 2 2
6 1
↓ ↓
OWN ANALOG NUMBER
YES TO SET PREVIOUS
NO TO CANCEL NEXT
OWN ANALOG NUMBER
YES TO END
_
OWN ANALOG NUMBER
YES OR CLR . NO
0111212-5551234 _
AREA CODE PREFIX
YES TO SET PREVIOUS
NO TO CANCEL NEXT
NETWORKING ADVANCED FEATURES
84