Ricoh FAX5600L - Manual (Page 83)

Immediate Transmission
Procedure
If you do not wish to store the fax message in memory before sending it out, use
the following procedure.
❐ The merits and demerits of Immediate Transmission and Memory Transmission
are discussed on pages 47 and 48.
1. Make sure that the machine is in standby mode (see page 49).
2. Memory
❐ The Memory indicator should go out.
3. Place the document face down into the
feeder.
4. Dial (only one destination).
See page 50 for how to dial.
5. Start
6. The machine dials and the line to the other party is connected. The number
that you dialed is displayed (or if you used Quick Dial or Speed Dial, the
Quick Dial or Speed Dial Label stored for that number is displayed).
Converting Immediate Transmission to Memory Transmission
If there is a message still waiting in the document feeder, you can convert it into a
memory file if you press
Memory Start . The document will be scanned and
stored into memory, leaving the document feeder free for others to use.
IMMEDIATE TX OPTIONS
ENTER FAX NUMBER
_
IMMEDIATE TX OPTIONS
PRESS YES OR CLR . NO
2125551234 _
DIALING
2125551234
FILE NO. 0046
R
O
U
T
IN
E
O
P
E
R
A
T
IO
N
ROUTINE OPERATION SENDING A FAX MESSAGE
69