Ricoh FAX5600L User Manual
Page 63
Sending to Just One Location
1. Make sure that the machine is in standby mode:
❐
The display on the operation panel must
be as shown on the right.
2. Carefully place your fax message into
the auto document feeder.
MEMORY TRANS. APR. 4. 12:25PM
SET DOCUMENT
MEMORY 100%
MEMORY TRANS. OPTIONS
ENTER FAX NUMBER
_
❐
To dial without placing the message in the
feeder first, see Direct Fax Number Entry on
page 68.
❐
If you only wish to scan a part of the
document, use the Specified Image Area
feature. See page 118 for details.
❐
The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
❐
Feed the pages in so that the top edge goes in
first.
❐
Do not feed in more than 50 pages.
❐
Do not use unsuitable types of original (see
pages 45 and 46).
❐
Adjust the document guides to fit the width of
the pages.
❐
Do not use pages of different sizes.
❐
The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.
Selecting Contrast and Resolution: See page 54.
Options for Sending a Message: See page 59.
Scanning only a part of the document (Specified Image Area): See page 118.
R
O
U
T
IN
E
O
P
E
R
A
T
IO
N
ROUTINE OPERATION
SENDING A FAX MESSAGE
49