Ricoh FAX5600L - Manual (Page 132)

Making a Secure Transmission
1. Make sure that the machine is in standby mode (see page 49 for details), then
place your document in the feeder.
2. Press the User Function Key that you have programmed for Secure
Transmission (if the light under that key is off).
3. Dial in the normal manner.
See page 51 for how to dial.
4. Press Start . The fax message will be printed automatically at the other end.
Secure Transmission only works if the machine at the other end is equipped with
the same feature.
Specified Image Area
Overview
If you only wish to transmit a part of the page, use this feature. You tell the
machine what area to scan by specifying two parameters: The Skip Length, and
the Scan Length. See the following diagram.
This feature cannot be used when you are transmitting using an OMR sheet,
immediate transmission, when you are making a copy.
Before you can to use the feature during a transmission, you must:
❐ Set up the feature using Function 96 (see the next page).
❐ Program one of the User Function Keys so that you can activate this feature
during the transmission procedure.
Note: If skip length is longer than the paper, the machine stops scanning.
Skip
Length
Scan
Length
TRANSMISSION ADVANCED FEATURES
118