Ricoh FAX5600L - Manual (Page 38)

Date and Time
Your fax machine has an internal clock. It controls the following features.
❐ The time display on the operation panel while the machine is idle.
❐ Operation of time-delay features like Send Later.
❐ The date and time that is printed out on pages that you receive, if Reception
Time is switched on.
❐ The date and time that is printed out at the other end on pages received from
your machine.
Program the correct date and time when you install the machine.
Cross-references:
Send Later: see page 60.
Reception Time: see page 149.
Economy Transmission: see page 66.
1. Function 6 0 2 2 2 2 9 2
2. Use the ← and → arrows on the scroll key to move the cursor across
the display. Use the keypad to correct the individual elements.
❐ To change the month, move the cursor to the month and scroll through the
months with the ↑ and ↓ keys.
❐ To change from AM to PM and vice versa, move the cursor to the time, and
press * or # .
❐ Press
Yes Function when the display is correct.
Daylight Saving Time
Whenever local custom requires advancing the clock or setting the clock back,
use this feature. You can easily move the clock forwards when daylight saving
time begins, and back when it ends.
❐ When you install the machine for the first time, take care that the setting is
correct before you set the date and time.
1. Function 6 0 2 2 2 2 8 1
then ↓ until the screen is as shown
opposite.
CLOCK INPUT DATE/TIME
FEB 01 1992 (SAT) 01:56PM
YES TO END
DAYLIGHT SAVING TIME SELECT
ON OFF
YES TO END
BEFORE YOU SEND YOUR FIRST FAX
24