Yokogawa DAQWORX - Manual (Page 104)

4-57 IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
DAR
WIN Hardware Configurator
4.30 Subunit and Module Configuration
It is possible to attach or remove units and modules, or to change module types using
DARWIN Hardware cofigurator.
Select Config. > Module Configuration from the menubar to display the Module
Configuration setting screen.
Main unit
Click here to
remove a
subunit
Unit number
Click here to
add a unit
When pointing a module, its name will appear.
A module selection pull-down menu will appear when it is clicked.
Adding and removing subunits
To add a subunit click an empty subunit placing area and click OK when asked ‘Add
Unit?.’
To remove a unit click right side of the module (reading DS600/DS400) and click OK
when asked ‘Delete Unit?.’
Adding and Removing Modules
To add a module, click the module space on a subunit. The Module Selection pull-
down box opens. Select the desired module, and click OK. The selected module will get
displayed.
To remove a module, again click the module you want to remove, and in the Module
Selection pull-down box that appears, select NONE.
Note
• If a unit or module gets removed, all the settings related to it, will also be reset.
• All subunits will be appear as DS660s. When adding modules, apply a maximum of 4
DS400 modules, or 6 DS600 modules.